Skip to product information
1 of 7

Alba 250RHF

Alba 250RHF

Tax included.
Wheel size
Battery
Display
Brake type
Lighting set

In the box

• 250 W geared hub motor laced into a rear wheel
• Alba rack-mounted Li-ion battery pack with integrated brake light (capacity chosen when ordering)
• 36 V 6-MOSFET sine-wave controller (integrated in the battery mount)
• Alba G518 NFC colour LCD display
• Walk-assist lever (thumb lever)
• 12-magnet cadence sensor (PAS)
• All cables and sealed connectors
• 36 V 2 A charger

View full details
ALBA Elektrikli Ulaşım Araçları A.Ş.
Minareliçavuş OSB Mah. 308. Sk. No: 5C, NOSAB, 16200 Nilüfer/Bursa, Türkiye
Phone: +90 224 443 74 24 · Email: sales@alba-ebikes.com
Alba 250RHF

Alba 250RHF E-Bike Conversion Kit

Keep your bike. Make it electric.

Convert your bike with a 250 W high-torque geared hub motor in the rear wheel, for light, comfortable city assistance. Designed, assembled and tested by Alba in Bursa, Türkiye.

High-torque geared hub motor

Rated power 250 W
Torque 32 N·m
Motor type Geared hub, rear
Voltage 36 V
Controller Sine-wave
Motor protection IP65
Brake compatibility Disc and V-brake
EPAC class Possible with a compliant installation

Why a conversion kit?

A kit is not just the budget option. It lets you build exactly the system you want on your own bike.

🚲

Keep the bike you love

No need to buy a new bike. Add electric assistance to the bike and geometry you already know.

⚙️

Configure it yourself

Choose the wheel size and battery capacity you need. No fixed package; your choice.

🔋

Modular system

Step up to a larger capacity later with an Alba battery approved for your kit's voltage, connector and mount.

A kit is for you if: you want to convert your current bike, configure the system yourself or keep control of your budget.

Looking for a complete e-bike? If you want a ready-built e-bike, see the Alba e-bike range.

In the box

  • 250 W geared hub motor laced into a rear wheel
  • Alba rack-mounted Li-ion battery pack with integrated brake light (capacity chosen when ordering)
  • 36 V 6-MOSFET sine-wave controller (integrated in the battery mount)
  • Alba G518 NFC colour LCD display
  • Walk-assist lever (thumb lever)
  • 12-magnet cadence sensor (PAS)
  • All cables and sealed connectors
  • 36 V 2 A charger
All connectors are colour-coded and sealed for easy identification; follow the installation manual for every connection. The kit contents are listed above; some bikes need additional fittings or tools.

Will it fit my bike?

  • Rear dropout width: 135 mm
  • 6/7-speed screw-on freewheel or 8-speed-and-above cassette
  • 6-bolt disc brake compatible
  • V-brake compatible
  • No USB port
  • Wheel size chosen when ordering: 20, 24, 26, 27.5, 28 or 29 inch
  • Ask us about lighting compatibility
250 W EPAC class. After installation the converted bike can qualify as an EPAC only if the complete installation meets the EPAC requirements: assistance is given only while pedalling and cuts off at 25 km/h, and the thumb lever is used only as walk-assist up to 6 km/h. The installer must make sure the converted bike is safe and complies with the rules of the country where it is used. Do not change the factory settings.

For kit selection, wheel sizes, installation steps and the manual, contact sales@alba-ebikes.com