Collection: E-Bike Conversion Kits

Happy with your bike? Convert it to electric with one of eleven Alba conversion kits: front hub (FH), rear hub (RH) or mid-drive motor (Mid), from 250 W to 1,000 W. Most hub kits come laced into a 20–29-inch wheel (fat 20–26-inch; 1000RHE has a fixed 20-inch cast wheel); each kit includes the motor, controller, colour display, sensor, walk-assist lever and cables, with a 36 V or 48 V Li-ion battery.

Choosing the right kit

Front, rear or mid-drive motor?

FH series (front hub): light assist in the city; rear gears untouched. 250 W, 32 N·m, 36 V. RH series (rear hub): from light assist to loads, climbs and fat bikes; 250, 500 and 1,000 W, dual motor 2 × 85 N·m. Mid series: the motor fits in the bottom bracket and drives through the chain and gears; 750 or 1,000 W, 120 or 160 N·m, highest torque on steep climbs.

Read the kit code

The number is the rated power in watts. FH front hub, RH rear hub, Mid mid-drive motor. A final F means the battery sits on an illuminated rear-rack mount (250FHF, 250RHF, 500RHF); without it the battery mounts on the frame in place of a bottle cage. Fat is for wide wheels; Dual drives front and rear wheels together.

Will it fit my bike?

Hub kits: measure the fork or rear dropout width; rear kits are supplied for a 6- or 7-speed screw-on freewheel or an 8-speed-and-above cassette. Hub kits are not suitable for carbon forks. With aluminium or quick-release forks, check the dropouts and axle retention before installation, and fit the torque washers as shown in the manual; a torque arm is available as an option for 500 W kits. Mid kits: bottom-bracket shell 68–73 mm (BSA). Brakes: compatible with V-brakes and disc brakes.

EPAC class

A bike converted with a 500 W, 750 W or 1,000 W kit is not an EPAC: off-road use only, not for public roads. With 250 W kits the converted bike can qualify as an EPAC only if the complete installation meets the EPAC requirements: after installation, assistance is given only while pedalling and cuts off at 25 km/h, and the thumb lever is used only as walk-assist up to 6 km/h. The installer must make sure the converted bike is safe and complies with the rules of the country where it is used. Do not change the factory settings.

11 products